节点文献

基于回转切削的岩石力学参数获取新思路

ACQUIRING MECHANICAL PARAMETERS OF ROCK BASED ON ROTATIONAL CUTTING

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 李宁李骞宋玲

【Author】 LI Ning;LI Qian;SONG Ling;Institute of Geotechnical Engineering,Xi’an University of Technology;College of Water Conservancy and Architectural Engineering,Shihezi University;

【机构】 西安理工大学岩土工程研究所石河子大学水利建筑工程学院

【摘要】 基于回转钻探和静力触探试验的综合优势,开发并进行系统地旋进式触探试验,在室内试验和理论推导的基础上进一步验证。从旋进式触探机制入手,根据切削、静压及钻压作用过程建立旋进式触探试验参数钻压、扭矩与每转进给量之间的关系曲线,结合室内试验成果进而以曲线斜率和钻削理论为依托推导出岩石的抗压强度、弹性模量、内摩擦角及黏聚力的计算公式。以粉煤灰砌块旋进式触探试验成果为例,按上述方法计算试样4大基本力学参数,与试验实测值进行验证。结果表明计算值与室内实测的基本力学参数值比较接近,论证了该方法的可行性和后续研究的可期待性。

【Abstract】 A system of rotary penetration was developed combining the advantage of rotary drilling and static penetration with verifications from laboratory tests and theoretical study. According to the mechanism of rotary penetration,the relationships between the drilling pressure,the torque and the feed per rotation in the processes of cutting,the direct pressing and the bit pressing have been found. The formulae for the compressive strength,the elastic modulus, the internal friction angle and the cohesion of rock were derived on the basis of laboratory test results. The method was applied to the fly ash blocks and the measured results were in good agreement with the calculated ones,which indicated the feasibility of the proposed method.

【基金】 国家自然科学基金资助项目(50879068);国家自然基金委创新团体基金资助项目(40821001)
  • 【文献出处】 岩石力学与工程学报 ,Chinese Journal of Rock Mechanics and Engineering , 编辑部邮箱 ,2015年02期
  • 【分类号】TU452
  • 【网络出版时间】2015-01-09 15:24
  • 【被引频次】2
  • 【下载频次】241
节点文献中: