节点文献

立筒单仓模型动力测试与参数识别研究

Study on Dynamic Test and Parameter Identification of the Single Silo Model

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 张大英王录民王树明

【Author】 ZHANG Daying;WANG Lumin;WANG Shuming;School of Civil Engineering,Zhengzhou Institute of Aeronautical Industry Management;School of Civil Engineering and Architecture,Henan University of Technology;Henan Orient Architectural Design Co. ,Ltd.;

【机构】 郑州航空工业管理学院土木建筑工程学院河南工业大学土木建筑学院河南东方建筑设计有限公司

【摘要】 以某粮库立筒仓结构单仓模型为研究对象,进行了环境激励测试方案和模态参数识别研究。结合单仓自身的结构特点,提出了切实可行的测点布置方案和分批测试方案。通过对测试数据进行预处理分析,消除了原始信号的趋势项,保留了所感兴趣的频率信号。利用时域模态参数识别方法识别得到了单仓有效的频率、阻尼比和振型,并与传统峰值拾取法识别结果进行了对比分析,实现了互补和验证。单仓研究结果可用于指导在役立筒仓结构的环境激励测试和模态参数识别研究。

【Abstract】 A single grain silo model was taken for the study on test plans to ambient excitation test and modal parameters identification. Combined with the characteristics of the single silo,the practical measuring-points arrangement and batch testing program were proposed. Through the preprocessing analysis of the test data,the original signal trend item was eliminated,and the frequency signal of interest was retained. Then,the timedomain modal parameters identification method was used to identify the frequency,damping ratio and vibration mode shapes,meanwhile the traditional peak picking method was employed to obtain associated modal parameters. The comparison of numerical results of these two methods achieved complementarity and verification. The obtained results can be used to guide the study on ambient excitation tests and modal parameters identifications of silo structures in service.

【基金】 国家自然科学基金项目(51178164)
  • 【文献出处】 结构工程师 ,Structural Engineers , 编辑部邮箱 ,2014年06期
  • 【分类号】TU317
  • 【被引频次】4
  • 【下载频次】36
节点文献中: