节点文献

基于Halbach阵列楔形气隙盘式无铁心永磁同步电机的研究

Study of Disk Coreless Permanent Magnet Synchronous Motor with Wedgy Airgap Based on Halbach

【作者】 杜静娟

【导师】 王晓远;

【作者基本信息】 天津大学 , 电机与电器, 2007, 硕士

【摘要】 本课题是国家863计划项目《高性能稀土永磁电机技术集成及关键材料》(2004AA32G080)的部分研究内容,本文的主要内容是对基于Halbach阵列楔形气隙盘式无铁心永磁同步电机的设计及其电磁场分析。该类电机作为一种现代高性能伺服电机,具有重量轻、结构紧凑、振动噪声低、转动惯量小,机电时间常数小、低速运行平稳等特点,在数控机床、机器人、电动车、电梯、家用电器等场合具有广阔的应用前景。本论文充分利用外径空间提出了新型的基于Halbach阵列楔形气隙盘式无铁心永磁同步电动机,该电机通过改变气隙结构以进一步提高盘式无铁心永磁同步电机的气隙磁密,达到提高电机性能的目的,并针对这种电机进行建模和电磁场分析计算。由于此类电机的特殊结构,很难将三维开域磁场化为二维磁场计算,其气隙磁密按三维开域磁场分析,通过大量有限元的仿真分析最终确定了较小实用求解区域,简化了计算。基于Halbach阵列楔形气隙盘式无铁心永磁同步电机与普通永磁电动机有很多不同之处,与传统的电机参数计算相比,许多计算方法不再运用,本文针对该类电机给出了几个典型的计算公式,并总结了基于三维电磁场分析计算盘式无铁心同步电机的电磁计算程序,最后编制出了一套电磁设计计算的CAD软件。在制作工艺上,内/外转子结构的加工工艺、永磁体的固定加工、绕组盘的安装与定位、灌胶成形等难题都得到了解决,还制作了适合于盘式电机总装的特殊工艺设备。在理论分析和磁场仿真相结合的基础上,初步设计250W和2500W的两台样机;并对样机进行了大量的试验,分析试验结果,并与同规格的其他样机进行性能比较,进一步完善和总结。本论文的电机由于无铁心和楔形气隙的特殊结构,其重量大大减轻,电机的效率提高,转矩波动小,振动噪声明显减小等等,特别适合一些特殊的应用场合比如电动汽车、船用推进器、手持电动工具、机械臂等等。

【Abstract】 As one part of the national project 863(2004AA32G080), text concentrates on the design and magnetic field analysis of disk coreless PMSM with wedgy airgap based on Halbach. As a high performance servo-motor, there are many characteristics of low mass, compact structure, low noise, low moment of inertia, small electromechanical time constant, steady running status in low speed in the disk coreless PMSM with wedgy airgap. As a perfect driving device, it could be used in many fields, such as numerical control machine, robot, electric vehicle, home appliance and so on.To optimize the motor, disk coreless PMSM with wedgy airgap based on Halbach is developed in text, making good use of the outer diameter. The magnetic flux density of this motor is heightened to obtain better performance by changing the structure of airgap. The coreless PMSM with wedgy airgap is analyzed by FEM. The FEM analysis has been done to prove that the method reducing the open domain into the smallest domain can obtain the results approximate to the accurate results. So the intention of simplification is achieved.There are many differences in structure between the disk coreless PMSM with wedgy airgap and traditional PMSM. There are no cores in the magnetism circuit except PMs. Leak magnetism circuit is very complex especially when the structure of wedgy airgap adopted causes magnetism circuit asymmetric. The calculation method of the disk coreless PMSM is also different from the traditional one. Several typical formulas are given in the text. The design method of disk coreless PMSM with wedgy airgap based on Halbach array is summed up and CAD software is compiled. In the technics, many difficulties are solved such as the inner/outer rotor structure technics, the fixation of PMs, the winding’s perfusion, orientation and installation. And the special technics equipment for the machining of the disc motor must be taken into account. At last, the sampling motors of 250W and 2500W are designed and developed. Much experiment is made to prove that the performance of the disk coreless PMSM with wedgy airgap is better than the traditional PMSM with same power.Because of the structure of coreless and the wedgy airgap, compared with the traditional PMSM, the mass is much lighter and the efficiency is higher and vibratory noise is obviously lowered. The disk coreless PMSM with wedgy airgap could be used in many fields, especially electric automobile, ship propeller, electric tool in hand, machine arm and so on.

  • 【网络出版投稿人】 天津大学
  • 【网络出版年期】2009年 04期
节点文献中: