节点文献
EDA技术结合μClinux操作系统在地震前兆仪器中的应用
Application of EDA technology and μClinux operating system in earthquake precursor instruments
【摘要】 应用Altera公司的QuartusⅡ、NIOSⅡIDE开发软件和SOPC Builder工具,采用cy-cloneⅡ系列FPGA芯片——EP2C35,设计了质子式旋进磁力仪原理主机硬件平台.构建和配置了NiosⅡ软核处理器、IO接口电路及传感器控制电路,编写了全数字锁相环、等精度计数器等硬件单元的VHDL代码,实现了质子旋进式磁力仪器原理主机核心电路的单芯片系统逻辑设计.研究了μClinux嵌入式操作系统的配置技术,并建立了基于NiosⅡ软核处理器的μClinux交叉编译环境,成功将μClinux移植到NiosⅡ环境中.在该系统下编写了主机硬件平台的设备驱动程序和用户程序,实现了原理样机各设计功能,达到了预期目标.
【Abstract】 Using Altera’s Quartus Ⅱ,Nios Ⅱ IDE and SOPC Builder development tools,the proton precession magnetometer principle host hardware platform is designed with a cyclone Ⅱ series FPGA chip(EP2C35).The single-chip system-logic design of the proton precession magnetometer principle host core circuit is achieved by building and configuring the Nios Ⅱ soft-core processor,developing the IO interface and sensor control circuits,and programming some hardware units’ VHDL code,for example,the equal precision cymometer and the DPLL.Through researching the embedded operating system configuration technology and building the NIOS Ⅱ soft-core processor’s μClinux cross-compile environment,the μClinux system is transplanted to the NIOS Ⅱ environment.Another important task of this study is writing the code for device drivers and user programs.Through these works,the design has realized the host function and achieved the expected target.
【Key words】 EDA; μClinux; proton precession magnetometer; device driver; DPLL; equal precision cymometer;
- 【文献出处】 地震学报 ,Acta Seismologica Sinica , 编辑部邮箱 ,2009年04期
- 【分类号】P315.62
- 【被引频次】1
- 【下载频次】58