【作者】 何鹏；

【导师】 王晓冬；

【作者基本信息】 东北大学 ， 流体机械及工程， 2008， 硕士

【摘要】 物理气相沉积技术目前主要有热蒸发、溅射、离子镀等方式。溅射技术的出现和应用已经经历了许多阶段,从二极溅射、三极溅射、磁控溅射以及各种新型的溅射方法。相比较而言,二极溅射的结构简单、易于控制,但是由于放电形式决定了其等离子体密度较低,相应的沉积速率也较低。磁控溅射与二极溅射相比,则具有“高速”与“低温”的特性,沉积速率较高,且基片升温也较低,但由于磁控溅射磁场的分布不均匀,而磁场是其关键的因素,控制真空室中的等离子体的生成,因此由不均匀磁场所带来了等离子体不稳定、靶材利用率低等缺点。本文采用新型磁控溅射设计,取消了“磁控”靶,并应用在远位安装高密度等离子体源的设计,研制出了等离子体束溅射镀膜机。试验结果及国外的结果表明,这种新型的溅射镀膜方法解决了磁控溅射中的靶材利用率低及等离子体不稳定的缺点,并能够有效地控制成膜晶粒的大小。等离子体束溅射镀膜机中等离子体束在磁场与电场的共同作用下,形成了从等离子体源到真空室中的被引出、输运、溅射等的一系列过程。在成功研制出等离子体束溅射镀膜机后,对真空室内的电场与磁场应用COMSOL Multiphysics电磁模块进行了有限元分析,得出了在这种与已有方案都不同的结构中电场与磁场的分布。真空室中的电场通过溅射靶源接通负偏压后产生,而磁场则由发射线圈与汇聚线圈共同产生,电场与磁场相互独立,并共同对等离子体束产生影响。通过对等离子体束溅射镀膜机具体结构的分解,并应用单粒子轨道模型对镀膜机内部等离子体束的引出束流做出了分析,发射线圈从高密度等离子体源中引出等离子体束,其中包括电子与离子。等离子体束在磁场与偏压电场的共同作用下轰击靶面,使靶材产生溅射。通过对等离子体在磁场与电场中的运动进行定性分析,对等离子体束溅射镀膜中的原理进行了探讨。更多还原

【Abstract】 Now Physical Vapor Deposition mainly includes heat evaporation, sputtering and ion plating. The appearance and application of sputtering technology come through lots of process such as diode sputtering, audion sputtering, magnetron sputtering and other novel sputtering system. The diode sputtering system has simple structure and can be controlled easily, but its plasma’s density is low and the deposition rate is low because of its discharge structure. Compared with the diode sputtering, the magnetron sputtering system has higher deposition rate and lower temperature of its substrate. Since its magnetic field is the main factor of state of plasma, the asymmetry of magnetic field brings the instability plasma and low utilization target and others disadvantages.Beijing Leyfond Vacuum Technology Company Limited has manufactured the plasma beam sputtering system. There is not magnetron target in this system and there is a high density plasma source mounting in the side of the chamber. The experiment result that it has higher utilization target and stability plasma and it can controlled the grain size effectively.The plasma beam in the system is extracted from the plasma source, then transports in the chamber and sputters on the target under the effect of the electric field and the magnetic field. After we manufactured the plasma beam sputtering system, we analyzed the electric field and the magnetic field in the chamber using the electromagnetic module of the COMSOL Multiphysics, and we got the distribution of the electric field and the magnetic field. The electric field comes when the target was switched on with the negative deflection voltage, and the magnetic comes with the launch magnet and the steering magnet, they are independent with each other, and effect the plasma beam together.We analyzed the extracted beam stream of the high density plasma source through the decomposition of the plasma beam sputtering system and application of single particle orbit model., the plasma beam is extracted from the source by the launch magnet. The beam bombards the target and then sputters in the electric field and the magnetic field. We study the principle of the plasma beam sputtering system after the analysis of plasma’s movement in the electric filed and magnetic field.更多还原