【作者】 李天庆；

【导师】 陈荣保；

【作者基本信息】 合肥工业大学 ， 检测技术与自动化装置， 2008， 硕士

【摘要】 本文着重讨论图履带式能力风暴越野版移动机器人AS-RF实现自主爬楼梯所需要的感知识别楼梯尺寸和机器人姿态的方法,并基于多传感器融合自主爬楼梯的控制,讨论机器人爬楼梯的控制方法和控制系统结构。通过对移动机器人(AS—RF)传感器系统以及扩展的传感器系统的分析,本文的主要内容有:首先研究了移动机器人基于各传感器的姿态感知,主要研究利用声纳、激光感知楼梯环境,得到两个控制参数;将单目CCD得到的图像进行边缘提取、线段拟合和台阶判别处理,方便后面多传感器感知数据融合。然后介绍多传感器融合理论并针对D-S证据理论存在的问题采用了一种改进的D-S证据理论方法。本文根据传感器的局部决策先算出局部决策值,构造整个系统的支持矩阵,然后求这个支持矩阵的特征向量,以此作为各个传感器的可信度。这个可信度就可以作为各个传感器的权值,以此修正D-S证据的融合算法。最后,给出了一个对比仿真实验,证明此算法在处理错误或大偏差证据的有效性。最后通过多传感器融合后的感知参数来控制移动机器人自主爬楼梯控制,自主爬楼梯控制可以分成单层楼梯的自主爬行和多层楼梯的自主爬行。在单层自主控制的基础上,通过机器人自动检测是否到达楼梯顶部平台、自动寻找下一层楼梯即可实现多层楼梯的自主爬行,控制机器人在爬楼梯过程中自主调节位姿以保证安全爬上楼梯。更多还原

【Abstract】 This article researches on the method that can be used by AS-RF mobile robot in climbing the stairs and apperceiving the position of stairs and robot. Based on multi-sensors amalgamation, this article also talks about the configuration of control system and its control policy.After making analysis to the AS-RF system and the sensors’ extended system, the main content of this article can be divided as follows:First of all, apperceiving pose and position of robot based on several sensors, such as sonar and laser, is researched in order to achieve the control parameters; the images came from the CCD are disposed by edge distilling, line fitting and sidestep distinguishing in order to make facility to the following data fusion of multi-sensors.Secondly the theory of multi-sensor fusion is introduced and an improved method of D-S evidential reasoning is adopted to slove the present problem of D-S evidential reasoning. The paper calculates the local decision on the basis of the measurement, on which the support matrix is based.Then the eigenvector is gained from the support matrix, and it is the reliability vector of the system. The paper improves the D-S evidential reasoning by giving a weight to evidence that equals to the evidence’s reliability. At last, an example is given out.It proves that the method described above is valid when some evidences are false or far from the real value.Finally, the robot is controlled to climb stairs through apperceiving parameters, the policy can be divided into two parts: monolayer stair climbing and multi-stairs climbing. The multi-stairs climbing can be accomplished through checking whether AS-RF has been in the roof of stair and finding the next floor’s stair based on monolayer stair climbing. The pose of robot should be controlled independently by itself in order to guarantee the safety in climbing stairs.更多还原