自动化守控系统的设计与实现

【作者】 沈新；

【导师】 黄迪明；

【作者基本信息】 电子科技大学 ， 计算机应用技术， 2007， 硕士

【摘要】 语音信号值守是一种常见的工作,被广泛应用在电信、医疗和军事等诸多领域。这项工作可能要长时间地面对噪声环境,而且根据业务数据性质的不同,重要的数据必须实现自动录制。在早期的守控系统中,从前端接收到终端信号值守的整个工作流程都需要工作人员手工操作,劳动强度很大,噪声环境对人的身体健康也产生着危害,信号录制设备的物理局限性还带来了数据的不可靠问题。就语音信号来说,在大多数计算机系统中,主要的音频设备是一块声卡,即便有多块声卡,操作系统几乎都限制使用其中的一块作为启用的音频设备。在某些场合,守控台位的工作要求同时使用多块声卡,实现对多路音频信号的数据采集,这样就提出了单计算机系统多声卡同时工作的课题。由于有多块声卡,采集到的数据会有多路,还必须实现声道的切换功能。声卡采集到的音频数据通常夹杂噪声,多数时候工作实际决定了采集到的音频数据夹杂种类繁多且分贝值高的噪声,这决定了需要研制的软件系统需要处理的音频数据是复杂的,为了保证工作数据的质量、改善工作人员的工作环境,必须对采集到的音频数据做有无判断。由于需要处理多路、大数据量的音频数据,而数据采集、处理的工作方式是各守控计算机分别采集处理或分发到其他计算机进行联合守控。广域网环境下,远程主机可以申请实时守控或者进行档案点播,因此,数据多播也是本系统研究的课题之一。本论文作者在分析人工守控方式的弊端基础上,针对某单位的工作实际,规划设计了以计算机为核心的硬件系统,提出了全新的自动化守控工作方式,以软硬件结合的形式实现了较高程度的语音信号自动值守。作者工作的主要内容为:1.设计并实现了音频数据的采集、传输和处理等技术,实现了语音的端点检测;2.设计并实现了基于Windows操作系统的硬件驱动程序;3.设计并实现了Windows下多声卡设备的控制;4.设计并实现了集群设备遥控。更多还原

【Abstract】 Keeping watch on speech signals is one kind of work which can often be seen in telecom, medical treatment, military affairs, and so on. This kind of work often faces to long time noise. Moreover, some kinds of data must be automatically recorded according to their special character. In early systems, people must be an intervenor in the whole work flow, from the signal incepting to the signal keeping watch. It’s sure that this work is easy to make people feel tired and unhealthy. Fallibility is also be carried by the physical limitation of the recording devices. According to speech signals, in most computer systems, the main audio-device is an audio card. Although there are more than one audio cards in many computers, the operation systems on them always allow user using one of the audio cards as the only one in use. But in some units, people need more than one audio cards to work at the same time in one computer on the workstation desktop in order to collect multi routes of audio data. Accordingly, we must also be able to switch the audio channels. The data collected by audio card often contains noises, and this circs is more serious in my unit. In order to ensure the quality of data and improve the working conditions, we should take measures to judge and reduce the noises in the data. After being collected, the audio data must be dealt with, perhaps also be transferred in intranet. Because there are some other application systems which use the intranet to transfer data, we must consider the questions about multicast.The Author comes up with a new solution of automatic keeping watch. This solution is based on the design of hardware systems and software systems. Computers are its kernel. In this way, automatic keeping watch is implemented in a certain extent. The main results of the author’s work are as follows:1. Design and implementation of audio data’s collecting, transferring and dealing with. We solved the problem of judging the existence of sound from noises.2. Design and implementation of hardware drivers based on Windows.3. Design and implementation of multi audio cards’control in Windows.4. Design and implementation of mass devices’remote control.更多还原