节点文献

基于数据挖掘的煤矿安全监测系统研究

Researches of the Mine Safety Monitor System Based on the Data Mining

【作者】 王宏云

【导师】 付华;

【作者基本信息】 辽宁工程技术大学 , 控制理论与控制工程, 2009, 硕士

【摘要】 本文对数据挖掘技术在煤矿安全监测系统中的应用作了初步的研究与探讨。同时针对目前煤矿安全监测系统中存在的不足,提出了改进的煤矿安全监测方案,基于CAN总线与无线射频技术相结合的煤矿安全监测系统。实现了部分硬件的设计。该方法弥补了传统有线传输只能测量固定地方的瓦斯浓度,缺乏移动性的问题,又解决了无线传感器网络的电源供给有限的弊端,综合了两种方法的优点,可以更好的进行监测。在软件方面,首先提出应用数据挖掘的模糊聚类方法和模糊评判技术,进行井下环境监测区域的划分和危险等级的判定,提出了综合距离度量和相似度量的新统计量,MATLAB仿真实验结果表明,该方法在煤矿安全监测中具有潜在的应用价值;其次提出应用时间趋势结构序列数据挖掘方法,进行煤矿井下瓦斯时间序列趋势的预测,MATLAB仿真实验结果表明,时间序列数据挖掘方法在煤矿井下环境预测中具有重要的应用价值;最后提出应用特征分析方法进行井下监测传感器的优化布点,建立了特征分析模型,突破了传统传感器布点只依据《煤矿安全规程》的布点方法,在理论和科学的层次上对传感器的布点问题进行了研究,实现了井下环境监测传感器的灵活布置。MATLAB仿真实验验证了方法的可行性。但由于条件和时间的限制,很多方面还有待改进和深入研究。

【Abstract】 The application of the technology of data mining in the mine safety monitor systemis investigated and discussed. Aimed at the deficiency of our country’s coal safetymining system, complex CAN bus and RFID technology are proposed and used in coalmine safety monitor system and achieve some of the hardware design. This method can’tonly compensate for the traditional cable transmission measurement of gasconcentration in a fixed place of issue of the lack of mobility, but also solve the wirelesssensor networks with limited power supply of the state. It is Combines the merits of bothapproaches can be better monitored.On the software side: First proposed the application of Data Mining fuzzyclustering method and fuzzy evaluation technology for underground division of theregional environmental monitoring and risk levels determined, a new statistic areproposed complex distance measure and similarity measure.MATLAB simulation resultsshow that the method in the coal mine safety monitoring has a potential applicationvalue; Second, application of TSDM method to predicte the gas trend in the future.MATLAB simulation results show that time series Data Ming method for eniviromentalprediction in the coal mine has an important application value; Last, application ofCharacteristic analysis method to optimize the place point of the sensor, breaking thetraditional distribution sensor based solely on“Coal Mine Safety Regulations”method,The level of theory and science to study the sensor’s distribution issue and realize theflexible arrangement of the sensor. MATLAB simulation results verify the feasibility ofthe method. However, as conditions and time constraints, there is still much room forimprovement and research.

  • 【分类号】TP274
  • 【被引频次】4
  • 【下载频次】301
节点文献中: 

本文链接的文献网络图示:

本文的引文网络