节点文献

储液罐子结构振动台试验仿真分析

Substructure Shaking Table Test Simulation Analysis of Liquid Storage Tanks

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 周利剑范远刚高斌单明康王向英

【Author】 ZHOU Li-jian 1,2,FAN Yuan-gang 1,2,GAO Bin 1,2,SHAN Ming-kang 1,2,WANG Xiang-ying 1,2(1.College of Civil and Architecture Engineering,Northeast Petroleum University,Daqing 163318,China;2.Heilongjiang Key Laboratory of Disaster Prevention,Mitigation and Protection Engineering,Daqing 163318,China)

【机构】 东北石油大学土木建筑工程学院黑龙江省防灾减灾及防护工程重点实验室

【摘要】 由于有限元仿真需要假设材料性能,难以真实全面地反映储液罐的地震响应;而振动台试验只能完成较小比例的模型试验,与储罐原型差距很大。为此,提出了储液罐子结构振动台试验方法,采用Malhotra力学模型,将储液罐划分为试验子结构和数值子结构两部分。运用MATLAB程序对储液罐子结构振动台试验进行了仿真试验分析。仿真计算表明:储液罐子结构仿真结果与全结构的计算结果有较好的吻合性,仿真计算的储罐基底剪力与规范算法接近。

【Abstract】 It is difficult to truly reflect the seismic response of the liquid storage tanks by the finite element simulation due to simplification of material properties.And the shaking table can only complete small scale model tests,the obtained results may quite different with what of the tank prototype.To this end,a method of the liquid storage tanks substructure shaking table test was proposed,using the Malhotra simplified model,the liquid storage tank is divided into two parts i.e.the experimental substructure and the numerical substructure.MATLAB program is used to simulate and analyze the liquid storage tank substructure shaking table test.The results are in good agreement with what of the whole structure.The obtained tank base shear force is close with what of the specification algorithm.

【关键词】 储液罐子结构仿真抗震
【Key words】 liquid storage tankssubstructuresimulationseismic
【基金】 中国石油科技创新基金(2011D-5006-0604)
  • 【文献出处】 压力容器 ,Pressure Vessel Technology , 编辑部邮箱 ,2013年07期
  • 【分类号】TB534.2
  • 【被引频次】4
  • 【下载频次】94
节点文献中: 

本文链接的文献网络图示:

本文的引文网络