节点文献

港口结构抗震设计方法的发展(5)

Development of seismic design of port and harbour structures:part 5

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 贡金鑫

【Author】 GONG Jin-xin(State Key Laboratory of Coastal and Offshore Engineering,Dalian University of Technology,Dalian 116024,China)

【机构】 大连理工大学海岸与近海工程国家重点实验室

【摘要】 以我国、美国和日本的港口码头设计规范、手册为基础,对我国、美国和日本港口码头抗震设计的方法进行了分析,同时介绍了国际航运协会标准《港口结构抗震设计指南》的有关规定。此系列论文共分6部分,该文为第5部分,分析和比较了我国、美国和日本规范中高桩码头的抗震设计方法。比较表明:对于高桩码头抗震设计,我国规范和美国规范采用反应谱法确定地震力,日本规范则将地震危险性分析得到的结果作为输入的地震波,根据结构的反应确定地震系数。美国规范给出了多种码头变形的计算方法。

【Abstract】 A comparative study was made on seismic design of port and harbour structures based on Chinese code,US guidelines and Japanese standards as well as guideline of international navigation association.This is the fifth of the series papers and the method for seismic design of pile-supported wharf in these codes is analyzed.It is shown that for the design of pile-supported wharf,the response force generated by earthquake is determined based on acceleration response spectrum in Chinese code and spectrum acceleration in US guidelines,and the seismic coefficient obtained from analysis of seismic hazard and dynamic response of structures is used in Japanese standard.Several approaches are presented in US guidelines for deformation prediction.

【关键词】 港口工程抗震设计规范
【Key words】 port structureseismic designcode
  • 【文献出处】 水运工程 ,Port & Waterway Engineering , 编辑部邮箱 ,2012年11期
  • 【分类号】U652
  • 【被引频次】1
  • 【下载频次】170
节点文献中: 

本文链接的文献网络图示:

本文的引文网络