【摘要】 利用大型三轴试验,研究了堆石料的等效剪切模量与孔隙比和平均有效正应力的关系。结果表明:根据Hardin公式求得的初始弹性模量均值反算得到的堆石料最大剪切模量与原试验数据相比误差较大,对平均有效正应力函数进行适当改进后,采用线性关系来表示平均有效正应力,反算得到的最大剪切模量与原试验值相比误差在6%之内,比原方法精确度有所提高。更多还原

【Abstract】 Based on a large-scale triaxial test,it investigated the relation between the equivalent shear modulus and the void radio and the effective mean normal stress.These can reach a conclusion that the back-calculate maximum shear modulus based on the average initial elastic modulus which come from Hardin equation,have a greater error compared with the test results.And then,after improving effective mean normal stress function,expressing effective normal stress with linear relation the error of equivalent maximum shear modules Gmax gained by back-calculation is less than 6% comparing with experimental data.The estimation accuracy can be improved.更多还原