节点文献

孕镶金刚石钻头破碎花岗岩岩屑粒径分布研究

Particle size distribution of granite swarf by impregnated diamond bit

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 赵小军康鑫潘飞飞潘秉锁段隆臣

【Author】 ZHAO Xiaojun;KANG Xin;PAN Feifei;PAN Bingsuo;DUAN Longchen;Engineering Faculty,China University of Geosciences;Jinan Institute of Survey and Investigation;Geological Exploration Institute of Henan;

【通讯作者】 段隆臣;

【机构】 中国地质大学(武汉)工程学院济南市勘察测绘研究院河南省地质矿产勘查开发局第三地质勘查院

【摘要】 收集微钻实验过程中孕镶金刚石钻头破碎花岗岩所产生的岩屑,分析其粒径分布,定量研究金刚石参数、钻进参数对岩屑粒径分布的影响。结果表明:岩屑粒径在一定范围内呈单峰值分布,粒径尺寸集中分布在40~100μm,粒径分布基本符合对数正态分布规律;金刚石粒度、浓度,钻压和转速对岩屑的粒径分布有较大的影响。

【Abstract】 The granite swarf produced by impregnated diamond bits were collected during micro-drilling experiments. The particle size distributions of the swarf were analyzed to quantitatively investigate the particle size distribution laws and the effects of diamond parameters and drilling parameters on the swarf size distributions. The results show that the particle size distribution of the granite swarf is consistent with logarithmic normal distribution. Most swarf particle sizes vary from 40 to 100 μm. Meanwhile, the swarf particle size distribution is influenced by the diamond size, diamond concentration, bit pressure and rotate speed.

【基金】 国家自然科学基金面上项目《基于张力环试验的热压钻头WC–Cu基胎体对金刚石把持力的定量研究》(41672364);河南地勘三院横向合作项目《豫西南地区复杂地层钻探技术研究》(KH176271)
  • 【文献出处】 金刚石与磨料磨具工程 ,Diamond & Abrasives Engineering , 编辑部邮箱 ,2019年01期
  • 【分类号】P634.41
  • 【网络出版时间】2019-03-04 07:00
  • 【被引频次】6
  • 【下载频次】202
节点文献中: 

本文链接的文献网络图示:

本文的引文网络