【摘要】 以开发塑性铰区埋入隔振橡胶层的新型RC柱为目的,通过橡胶层提高RC柱的变形能力、增强延性和耗能能力,改善传统RC柱的抗震性能;探讨埋入不同厚度橡胶层RC柱的承载力-变形特性、破坏模式和抗震性能。试验及分析结果表明:反复水平荷载作用下普通RC柱的塑性铰区出现较多的水平裂缝和竖向裂缝,且裂缝宽度较大,塑性铰区混凝土的损伤和破坏均较严重,RC柱的荷载-位移曲线呈反"S"的捏拢形;塑性铰区埋入橡胶层的RC柱的初始刚度与RC柱基本相同,水平承载力有所降低,但是,橡胶层能够显著提高RC柱的变形性能,裂缝稀疏且宽度明显变小,即塑性铰区混凝土的损伤降低,荷载-位移滞回曲线呈梭形,且没有明显的下降段,比RC柱具有更好的耗能能力。在水平荷载作用下,塑性铰区埋入橡胶层RC柱的水平承载力上升速度与埋入的橡胶层厚度有关,埋入的橡胶层越厚,水平承载力上升越慢。更多还原

【Abstract】 This paper aimed at developing a new type of column with a rubber layer built-in its plastic hinge zone, in which the deformation capacity, ductility and energy dissipation are increased and improved. The tests and the analyses of results showed that concrete in the plastic hinge zone of RC column was seriously damaged under horizontal cyclic loading and a large amount of horizontal cracks and vertical cracks with large width appeared and extended in the hinge zone of RC column, and the hysteria curves of load-deformation is reverse S shape. When the rubber layer was built in the hinge zone of RC columns, the ultimate strength of RC column slightly decreased, but the deformation property of RC column can be improved greatly by rubber layer, with decreasing amount and width of cracks, which implies that the damage and failure of concrete are reduced. The shape of hysteria curves of load-deformation became plump shuttle for RC columns with rubber layer built in, and had better energy-dissipating capacities. With the increase of the thickness of rubber layer, the loading capacity increased more slowly.更多还原