节点文献

粉煤灰最大往返剪切作用面上应变破坏标准的应力条件

The Failure Stress Condition on the Maximum Cyclic Shear Surface Associated with the Failure Stain Criterion of Flyash

  • 推荐 CAJ下载
  • PDF下载
  • 不支持迅雷等下载工具,请取消加速工具后下载。

【作者】 赵慧余湘娟梁万金

【Author】 ZHAO Hui~1,YU Xiang-juan~1,LIANG Wan-jin~2(1.Geotechnical Institute of Hohai University,Nanjing 210098,China;2.Civil Engineering College of Hohai University,Nanjing 210098,China)

【机构】 河海大学岩土工程研究所河海大学土木学院 南京210098南京210098

【摘要】 基于文献[1]提出的最大往返剪切作用面上的液化应力条件和粉煤灰的动三轴试验数据,运用回归分析方法拟合曲线及相关参数建立了粉煤灰的破坏应力条件,并应用F检验法对参数的回归效果进行了检验,检验结果表明参数的回归效果高度显著。得出的破坏应力条件表明初始剪应力与动剪应力的倒数间并不呈线性关系,而是二次多项式关系,这与张克绪所提出的应力条件存在着差异。因此,可初步认为张克绪的液化应力条件不能直接运用于粉煤灰。

【Abstract】 The reference[1] suggested the failure stress condition on the maximum cyclic shear surface for saturated sands in 1980s.According to his study,sand will fail when by the criterion that the pore water pressure is equal to the confining pressure.Based on Zhang Ke-xu′s formula and the dynamic triaxial test data of flyash,the failure stress condition on the maximum cyclic shear surface is established in this paper for flyash by using the method of regression analysis to fit curves and derive correlation parameters.In addition,the regression effect of the parameters is tested by the method of F test and the results indicated that the regression effect of the parameters is highly significant.The failure stress condition set up in this paper has shown that the relationship between the initial shear stress ratio and the reciprocal of cyclic shear ratio is not linear but quadratic.This result does not agree with Zhang Ke-xu′s formula which shows that the relationship between the two facts mentioned above is linear.So it can be concluded that Zhang(Ke-xu′s) failure stress condition on the maximum cyclic shear surface is not suitable for flyash.However,further work nust be done to make sure whether the formula set up in the paper is applide to other types of soils.

  • 【文献出处】 防灾减灾工程学报 ,Journal of Disaster Prevention and Mitigation Engineering , 编辑部邮箱 ,2006年01期
  • 【分类号】TU449
  • 【被引频次】1
  • 【下载频次】57
节点文献中: 

本文链接的文献网络图示:

本文的引文网络