节点文献
利用TGO软件的点校正功能实现物探测量GPS控制网待定点的解算
Using the Points Calibration in TGO Software to Realize the Solving of the Unknown Points in Geophysical Surveying GPS Control Network
【摘要】 基于泌阳凹陷高精度三维地震采集测量GPS控制测量项目,作者论述了在TGO软件中利用点校正功能求解控制网中待定点坐标方法。通过与约束平差结果的比较,证明了此方法的可行性。
【Abstract】 Based on the GPS control network project in Biyang high-precision three-dimensional seismic acquisition,authors discuss the solving of the unknown points cordinates in GPS control network with the use of points calibration in TGO software. By comparing with the results of the constrained adjustment, this method is proved to be feasible.
【关键词】 物探测量;
GPS控制网;
点校正;
转换参数;
【Key words】 geophysical surveying; GPS control network; point calibration; transformation parameters;
【Key words】 geophysical surveying; GPS control network; point calibration; transformation parameters;
- 【文献出处】 北京测绘 ,Beijing Surveying and Mapping , 编辑部邮箱 ,2009年04期
- 【分类号】P228.4
- 【下载频次】149